ASTM F67 Pure Titanium For Surgical Implant
Grade: UNS R50250/Gr.1, UNS R50400/Gr.2, UNS R50550/Gr.3, UNS R50700/Gr.4
Strip: THK.≤4.75mm Width.≤610mm
Sheet: THK.≤4.75mm Width≥610mm
Plate: THK.≥4.75mm Width≥254mm
Description
ASTM F67 Pure Titanium for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700)
1 Product classifications are consistent with Standard Specifications B265, B348, and B381.
1.1 Strip—Any product 0.1875 in. (4.75 mm) and under in thickness and less than 24 in. (610 mm) in width.
1.2 Sheet—Any product 0.1875 in. (4.75 mm) and under in thickness and 24 in. (610 mm) or more in width.
1.3 Plate—Any product 0.1875 in. (4.75 mm) in thickness and over 10 in. (254 mm) in width.
1.4 Bar—A hot rolled, forged, or cold worked semi-finished solid section product whose cross-sectional area is
equal to or less than 16 in.2(10322 mm2); rectangular bar must be less than or equal to 10 in. (254 mm) in width and greater than 0.1875 in. (4.75 mm) in thickness.
1.5 Billet—A solid semi-finished section hot rolled or forged from an ingot, with a cross-sectional area greater than 16 in2(10322 mm2) whose width is less than 5 times its thickness.
1.6 Forging—Any product of work on metal formed to the desired shape by impact or pressure in hammers, forging machines, upset presses, or related forming equipment.
1.7 Wire��Coiled round and non-round product with a diameter or major dimension equal to or greater than 0.3130 in.
NOTE: Wireless than or equal to 0.3125 in. in diameter or major dimension is covered in ASTM F 1341.
1.8 Other��Other forms and shapes, including tubing, may be provided by agreement between purchaser and supplier
Manufacture
Condition—Material shall be furnished in the hot-rolled, cold-worked, forged, annealed, or stress-relieved condition.
Finish—Unalloyed titanium material shall be free of injurious external and internal imperfections of a nature that
will interfere with the purpose for which it is intended.
Material may be furnished as descaled, pickled, sandblasted, or as ground, or combinations of these operations. The manufacturer shall be permitted to remove minor surface imperfections by spot grinding if such grinding does not reduce the dimension below the minimum permitted by the dimensional tolerance ordered.
metals (for surgical implants); orthopedic medical devices; titanium alloys; titanium/titanium alloy; titanium/titanium alloys (for surgical implants)
| Packing & Shipping |
1. Accept the request/customized packing | |
2. Normally, goods will packed in poly bag, drawstring bags, carrying bags, and cartons | |
3. For the sample, we will use TNT, Fedex, UPS, DHL, etc to ship it, | |
4. For bulk, it depends on the qty, by air, by train or by sea are all available. |
